• • Load-bearing structure with double-chamber extruded aluminum profiles with “thermal break” execution, where the sandwich panels are fixed with screws. Air tightness guaranteed by co-extruded gaskets and thermo-acoustic insulation made with mineral wool with a density of 80 kg/m3, with very high levels of sound absorption and fire reaction class M0. Use of paneling in different materials: pre-painted galvanized steel RAL 9002, aluminium, AISI 304 stainless steel and AluZinc.
  • 4 different profiles available based on the type and size of the unit:
  – 40 mm standard profile with 42 mm thick panel. Models from 14 to 215 – 60 mm standard profile with 62 mm thick panel. Models from 235 to 855
  – 40 mm thermal break profile with 42 mm thick panel. Models 14 to 215
  – 60 mm thermal break profile with 62 mm thick panel. Models from 235 to 855
  • Panels made in the following configurations:
  – external side in RAL 9002 pre-painted steel – internal side in galvanized steel
  – external side in RAL 9002 pre-painted steel – internal side in aluminium
  – external side in RAL 9002 pre-painted steel – internal side in stainless steel
  • Further different combinations available on request.

Single-flow AHU with P.A.E. damper, Coarse 50% + ePM1 50% filters, heating coil, steam humidification coil, fan:

• Single-flow AHU with mixing chamber (recirculation and P.A.E.), Coarse 50% + ePM1 50% filters, heating coil, cooling coil, steam humidification, post-heating coil, plug-fan.
• 

• AHU with plate heat recovery system (cross-flow or counter-current), supply and return plug fans, Coarse 50% or ePM10 50% return and Coarse 50% + ePM1 50% supply filtration, coil heating, cooling coil.

• AHU with rotary heat recovery system, EC type supply and return plug fans with 0-10v control and brushless motor, Coarse 50% or ePM10 50% return and Coarse 50% + ePM1 50% return filtration, heating coil, cooling coil.

• Use of the best components available on the market in terms of fans, filtration, heat recuperators (plate and rotary) and regulation

• BATTERIES
  All heating and cooling sections are equipped with laterally removable coils.
  The coils are standard in copper tubes and aluminum fins, but can be made of different materials on request. Copper/Copper and Copper/pre-painted aluminum are the most common non-standard combinations, but other particular executions are also possible. In heating we can have hot or superheated water, steam and condensation batteries (freon of any type). In cooling we can have chilled water and direct expansion batteries (freon of any type).
  The cooling sections are equipped with a removable condensate collection tray, in aluminum (standard) or stainless steel.

• FANS
  The ventilation section is the most important component for the correct functioning of the unit. For each model, a variable number of fans are available, with different characteristics, in order to always obtain the best performance of the machine, optimizing efficiencies and minimizing noise.

• RECOVERYERS
  LMF has always paid particular attention to heat recovery. The FLEX series offers the possibility of using
  the main recovery systems on the market: cross-flow with aluminum plates, rotary in hygroscopic aluminium, multiple batteries with intermediate carrier or heat pipes.